High Temperature Resistance Silicone Sealant

If you are planning to wholesale best cheap and high quality high temperature resistance silicone sealant China,Website:http://www.sepnasealant.com, or hot sale high temperature resistance silicone sealant in China from professional high temperature resistance silicone sealant manufacturers and suppliers and factory, please feel free to contact SEPNA, and welcome to check products price with us.SI1106RTV SI1106 is one component semi-flowing sealant room temperature curing neutral pouring silicone sealant.◆Detailed Product DescriptionFeatures 1.No corrosion to most kinds of metal.2.Excellent resistance to high—low alternative environment, aging resistance and electrical insulation performance.3.Excellent resistant to moisture, seismic, corona and electricity leakage performance.4.According ROHSUsage1.Insulation and fixed with a seal for electronic accessories.2.Used for most metal , plast bonding and sealing.3.Used for home appliances sealing such as microwave, electric stove, refrigerator, washing machine, etc.4.Used for automotive body sealing 5.Used for machinery adhesive sealing applications such as Solar modules Sealing◆Data TableTesting TermTesting standardSI1106 semi-flowing sealantProperties before curingAppearance--------White/Black Slight flowingViscosity (mPa.s)*GB/T 10247-200878,000±5000Dansity（g/cm3）GB/T 13354-921.25±0.05Touch Dry Time（min）GB/T13477.5-2002≤35Curing time(hr)\24Type of curing\one-component ketone-oxime siliconProperties after curingHardnes(Shore A)GB/T 531.1-200835±5Tensile strength（MPa）GB/T 528-1998≥1.0Shear strength（MPa）GB/T 6328-86≥1.0Elongation at break（%）GB/T 528-1998≥200Peel strength（N/mm）GB/T 6328-86＞5Application temperature(℃)\-60～260Volume resistivity(Ω·cm)GB/T 1692-92≥2.0×1013Dielectric strength (kV/·mm)GB/T 1693-2007≥18Dielectric constant (1.2MHz)GB/T 1693-20072.9Note: All data above were tested under special condition (7 days after fully cured in the environment of  25℃, 55%RH). Just for reference. Not suitable to any situation.◆Operation and Attention1.Cleaning: cleaning the surfaces that to be glued and coated, removing the rust, dust, greasy dirt and other foreign matter and substance.2.Gluing: cutting nozzle to the required angle ( piercing the sealing cap tip for these sealing rubber hose), extruding the liquid cement to the cleaned surface and making it well-distributed, then folding and fixing the glued surfaces. Please consult the PUNADE market department when come into the dispensing equipment. 3.Curing: placing the glued or sealed components in the air for 24 hours to make them cured naturally, and then putting into the use.4.Attention: tightening and sealing preserve the leftover sealant after the operation. Removing the cured cement at the sealing part that might happen during the preservation, it could be normally used again.◆Package and StoragePackage                                       25KG/Barrel(5 gallon barrel)   Storage and transport1 Kept sealed in cool and dry place.(Non-dangerous, stored and transported as normal chemical )2 Shelf life is 12 months（25℃）.Out of the deadline, pls test the performance of the products that before using.◆Safety Operation MaterialMSDS isn't included here. Please read TDS, MSDS and label carefully before operation.You can get MSDS from Sepuna or other distributors, or mail to service center [email protected], or call +86-400-882-1323.◆Product WarrantyAll product properties and application details based on information believe to be reliable and accurate. But you still need to test its property and safety before application. The advices we supply don't apply in any circumstances. Sepuna don't make assurance of any other applications outside the specification until Sepuna supply a special written guarantee. Sepuna is only responsible to replace or refund if this product is defective within the warranty period stated above. Sepuna makes it clear that will not be liable of any accidents.